P153.67 5002 FG35 E4P sugar mill chain: 153.67 mm pitch, 400 kN ultimate strength, alloy steel.
The SHINING 5002 FG35 E4P is an intermediate-carrier chain for the sugar mill, running at a 153.67 mm pitch with an average ultimate strength of 400 kN. Sidebar, pin and bush dimensions are given in the table below.
Intermediate carrier chains run in the most corrosive conditions in raw sugar juice, so the material and the heat treatment matter as much as the strength. We supply the 5002 in alloy steel with hardened pins and bushes, and can offer corrosion-resistant grades such as stainless steel where the duty demands it.
Intermediate Carriers: the line that runs in raw, corrosive juice.
Juice-Heavy Stations: conveying where corrosion and abrasion act together.
Sugar Mills: general heavy conveying through the sugar house.
Sugarcane Handling: wet cane and juice duty.
Heavy Bulk Handling: where a 153.67 mm pitch and 400 kN are required.
Intermediate carriers run in the most corrosive conditions in raw sugar juice, so the chain is made in alloy steel with hardened pins and bushes, and stainless options are available.
The average ultimate strength of 400 kN gives the chain the capacity of a loaded intermediate line while keeping a manageable pitch.
Hardening the pin and bush - the two surfaces that take the wear - is what stops the chain growing out of pitch in a corrosive, abrasive duty.
A straightforward link form with few parts is easier to inspect and to keep running than a complicated assembly in a wet environment.
Attachment and link dimensions are made to your drawing, so the 5002 drops into an existing carrier.
The table below gives the standard 5002 FG35 E4P chain. Pitch and other linear dimensions are in mm and the average ultimate strength in kN. Material is alloy steel; other grades and attachments are made to order.
| Chain No. | Pitch | E min | Sidebar | Pin | Bush | C | Ave.Ult strength | ||
| mm | mm | T(mm) | H(mm) | D(mm) | A(mm) | R(mm) | mm | Q(kN) | |
| 5002 FG35 E4P | 153.67 | 50.80 | 13.00 | 64.00 | 25.27 | 127.00 | 50.80 | 141.00 | 400 |
SHINING has manufactured conveyor chain and sprockets for sugar mills for over twenty years, with drop forging, welding, machining and heat treatment under our own control. Every production batch is tensile-tested before shipment, and our quality system is certified to ISO 9001:2015 (46026Q00958R053) and ISO 14001:2015 (46026E00959R053).
We build to interchange. Send the OEM part number, an old link or a drawing, and we will confirm the match and reproduce it dimension-for-dimension, with sprockets and attachments cut to suit.
Standard production lead time is 60 days from receipt of the order and confirmation of the drawing. For breakdowns and planned shutdowns we can discuss an expedited slot - tell us your date and we will plan the delivery around it.
Our engineers support station and duty review, chain selection, wear and elongation analysis, maintenance planning, and genuine replacement parts. Send your conveying duty and we will size the chain for you.
Tell us your duty, your drawing or the OEM part number, and our engineers will come back with the right chain and a price. Email the sales team at sales@shiningco.com.
