1209-A42+2C sugarcane bagasse carrier chain: 200 mm pitch, 90 mm roller, 800 kN tensile strength.
The SHINING 1209 is the bagasse carrier chain of the sugar mill, supplied with the 2C attachment. It is built on the P200 section: a 200.0 mm pitch with a 90.0 mm roller, a 32.0 mm pin, a 37.0 mm width between the inner plates and an average tensile strength of 800 kN (179,850 lbf).
SHINING sugar-mill chains have been exported for over twenty years - welded chains, forged chains and roller chains, used on feed and washing tables, bagasse carriers and the lines in between. The 1209 is the chain used as the bagasse carrier, where wet, fibrous bagasse is moved away from the milling train.
Bagasse Carriers: moving wet bagasse away from the milling train.
Feed and Washing Tables: front-end conveying of cane and trash.
Intermediate Carriers: conveying between milling stages.
Fuel and Boiler Feed: delivering bagasse to the boilers.
General Sugar-Mill Conveying: heavy, wet and abrasive duty.
Every working part - pin, bush and roller - is heat-treated or hardened to reach the strength and working life the sugar duty demands, not left in the as-machined state.
The chain is built for high strength and a long working life under continuous load, which is what keeps a mill's carrier line running between shutdowns.
The roller turns on the bush rather than sliding, so friction and wear are taken at the bush/roller interface and the pin is protected from the abrasive load.
A full line of matching sprockets is available, and attachments are made to your drawing, so chain, sprocket and attachment come from one source and wear together.
Chain, sprockets, slats, buckets and shafts can all be supplied together, so the whole assembly is sized and matched by one manufacturer instead of being pieced together.
The table below gives the standard 1209 bagasse carrier chain on the P200 section. Dimensions are in mm and tensile strength in kN/lbf. The 2C attachment is welded to your drawing.
| Chain No. | Pitch | Roller | Width between inner plates | Pin diameter | Plate dimension | Tensile strength | ||
| P | d3 max | b1 min | d2 max | L max | h2 | t/T | Q | |
| mm | mm | mm | mm | mm | mm | mm | KN/lbf | |
| 1209-A42+2C | 200.0 | 90.0 | 37.0 | 32.0 | 130.0 | 75.0 | 16.0 | 800/179850 |
SHINING has manufactured conveyor chain and sprockets for sugar mills for over twenty years, with drop forging, welding, machining and heat treatment under our own control. Every production batch is tensile-tested before shipment, and our quality system is certified to ISO 9001:2015 (46026Q00958R053) and ISO 14001:2015 (46026E00959R053).
We build to interchange. Send the OEM part number, an old link or a drawing, and we will confirm the match and reproduce it dimension-for-dimension, with sprockets and attachments cut to suit.
Standard production lead time is 60 days from receipt of the order and confirmation of the drawing. For breakdowns and planned shutdowns we can discuss an expedited slot - tell us your date and we will plan the delivery around it.
Our engineers support station and duty review, chain selection, wear and elongation analysis, maintenance planning, and genuine replacement parts. Send your conveying duty and we will size the chain for you.
Tell us your duty, your drawing or the OEM part number, and our engineers will come back with the right chain and a price. Email the sales team at sales@shiningco.com.
