4103-F29 and 4103-F30 stainless steel conveyor chain, corrosion resistant and food grade, 4.36 kg/ft.
4103-F29 is a stainless steel conveyor chain for duties where carbon steel would corrode. It is supplied in two sizes, 4103-F29 and 4103-F30, which share the same section - C 56.4 mm, J 79.2 mm, F1 66.5 mm, G 50.8 mm and T 10.4 mm - and the same 4.36 kg/ft weight.
Stainless chain is the standard choice for the manufacture of foods, chemicals and medicines, and for transmission in water. It keeps its appearance and its corrosion resistance in wet and high-temperature service, and it does not become brittle at low temperature.
Food Manufacturing: conveying and processing equipment where hygiene and corrosion resistance matter.
Chemical Plants: wet and mildly corrosive duties.
Pharmaceutical Production: clean conveying lines.
Water Treatment and Transmission: chain running in water.
Sugar Mills: stainless conveying where carbon steel would corrode.
The chain has the attractive, glossy appearance of stainless steel, which suits visible food and pharmaceutical equipment.
It can operate at high temperatures while maintaining excellent corrosion resistance and strength. In certain highly corrosive conditions, stress-corrosion cracking may occur, so the duty should always be reviewed with us.
The chain may be used at extremely low temperatures, because low-temperature brittleness does not occur.
There is slight magnetism, due to the cold-working processes. Where a fully non-magnetic chain is required, tell us and we will advise on the alternative.
Sprockets and attachments are available to suit the chain, and we build to the OEM part number for replacement and interchange.
The table below gives the standard 4103 section. Dimensions are in mm and weight in kg per foot. Other sections and attachment designs are made to order.
| Chain No. | Dimensions | Weight | ||||
| C | J | F1 | G | T | Kg/FT | |
| 4103-F29 | 56.4 | 79.2 | 66.5 | 50.8 | 10.4 | 4.36 |
| 4103-F30 | 56.4 | 79.2 | 66.5 | 50.8 | 10.4 | 4.36 |
SHINING has manufactured forged and engineered conveyor chain for over twenty years, with drop forging, machining and heat treatment under our own control. Every production batch is tensile-tested before shipment, and our quality system is certified to ISO 9001:2015 (46026Q00958R053) and ISO 14001:2015 (46026E00959R053).
We build to interchange. Send the OEM part number, an old link or a drawing, and we will confirm the match and reproduce it dimension-for-dimension, with sprockets and attachments cut to suit.
Standard production lead time is 60 days from receipt of the order and confirmation of the drawing. For breakdowns and planned shutdowns we can discuss an expedited slot - tell us your date and we will plan the delivery around it.
Our engineers support station and duty review, chain selection, wear and elongation analysis, maintenance planning, and genuine replacement parts. Send your conveying duty and we will size the chain for you.
Tell us the medium, the temperature and the wash-down regime, and we will confirm the right grade. Email our sales team at sales@shiningco.com.
