Yes. For the wettest and most acidic positions - juice strainers, cush-cush elevators, wash tables - pins, bushes and rollers come as a matched stainless set in one grade: 2Cr13 hardened for standard juice, 17-4PH for high-humidity duty.

Life depends on the station and the juice, not one figure. Judge it by elongation: a correctly specified, heat-treated chain stays within the take-up range far longer. Tell us the station and duty and we will set the specification.

Yes. Our chains and sprockets interchange with the major international sugar-chain brands. Send the OEM part number or a drawing and we will confirm the match; a short length of the original chain lets us measure and match it exactly.

Yes - OEM and replacement manufacturing are our core business. Send the old chain, a drawing or the pitch, inside width, pin diameter and attachment pattern, and we reproduce it dimension-for-dimension, with matching sprockets.

Standard lead time is 60 days from receipt of the order and confirmation of the drawing; minimum order is 100 meter of chain. Crush-season timing matters - tell us your start date and for urgent breakdowns we can discuss an expedited slot.

SHINING holds ISO 9001:2015 and ISO 14001:2015 certification covering the R&D and production of chains and sprockets, both valid to 21 July 2029. Every production batch is dimensionally inspected and tensile-tested, and Mill Test Certificates and insp

MOQ is 100 meter for chain. Sprockets are quoted per piece.

Yes. Send a worn sample or a short length and we will reverse-engineer it - pitch, plate and attachment geometry - and manufacture to the agreed specification.

SHINING is certified to ISO 9001:2015 and ISO 14001:2015. Inspection reports and certificates of conformance are issued with every order.

Yes. Non-standard pitches, special attachments, custom scraper or flight spacing, alternative materials and surface treatments are all routine for us.

Yes, and we recommend it. Chain and sprocket should be engineered as one system. We supply solid, split and segmental sprockets, tooth-cut to the actual pitch of the chain.

Yes. Send a worn sample or a short length and we will reverse-engineer it - pitch, plate and attachment geometry - and manufacture to the agreed specification.

MOQ is 30 meter for chain - a cement conveyor set runs 30 to 50 meter and is always heavy-duty, so one order covers a full line. Sprockets are quoted per piece.