2184 sugarcane chain with A42 attachment: 152.4 mm pitch, 356 kN ultimate strength, heat-treated throughout.
The SHINING 2184 is a roller conveyor chain widely used in the sugar industry, supplied with the A42 attachment for sugarcane conveying. It runs at a 152.4 mm pitch with a 22.23 mm pin and an average ultimate strength of 356 kN.
The chain has high strength, a long working life and good performance, because every component is heat-treated or hardened. We supply a full line of 2184 sprockets as well, so the chain, the attachment and the drive come matched from one source. Attachments are welded to your drawing.
Sugarcane Carriers: main conveying of cane into the mill.
Bagasse Conveying: wet, abrasive bagasse duty.
Flight and Scraper Lines: where an A42 attachment carries flights.
Feed and Washing Tables: front-end conveying of cane and trash.
General Sugar-Mill Conveying: heavy duty where a 2184 chain fits.
Every working part - pin, bush and roller - is heat-treated or hardened to reach the strength and working life the sugar duty demands, not left in the as-machined state.
The chain is built for high strength and a long working life under continuous load, which is what keeps a mill's carrier line running between shutdowns.
The roller turns on the bush rather than sliding, so friction and wear are taken at the bush/roller interface and the pin is protected from the abrasive load.
A full line of matching sprockets is available, and attachments are made to your drawing, so chain, sprocket and attachment come from one source and wear together.
Chain, sprockets, slats, buckets and shafts can all be supplied together, so the whole assembly is sized and matched by one manufacturer instead of being pieced together.
The table below gives the standard 2184 chain with the A42 attachment. Pitch and other linear dimensions are in mm and the average ultimate strength in kN. Matching sprockets are available.
Chain No. | Pitch | E(mm) | Sidebar | Pin | Bush | Roller | W(mm) | Average Ultimate Strength Q(KN) | ||
P | min | T(mm) | H(mm） | D(mm) | A(mm) | R(mm) | F(mm) | |||
2184 | 152.4 | 34.90 | 9.50 | 50.80 | 22.23 | 95.20 | 31.75 | 76.20 | 91.90 | 356 |
SHINING has manufactured conveyor chain and sprockets for sugar mills for over twenty years, with drop forging, welding, machining and heat treatment under our own control. Every production batch is tensile-tested before shipment, and our quality system is certified to ISO 9001:2015 (46026Q00958R053) and ISO 14001:2015 (46026E00959R053).
We build to interchange. Send the OEM part number, an old link or a drawing, and we will confirm the match and reproduce it dimension-for-dimension, with sprockets and attachments cut to suit.
Standard production lead time is 60 days from receipt of the order and confirmation of the drawing. For breakdowns and planned shutdowns we can discuss an expedited slot - tell us your date and we will plan the delivery around it.
Our engineers support station and duty review, chain selection, wear and elongation analysis, maintenance planning, and genuine replacement parts. Send your conveying duty and we will size the chain for you.
Tell us your duty, your drawing or the OEM part number, and our engineers will come back with the right chain and a price. Email the sales team at sales@shiningco.com.
