P152.4 sugar mill chain with A2 attachment: 152.4 mm pitch, D 25/H 65/T 10 mm, F 76 and E 42 mm.
The SHINING P152.4 is a sugar-mill conveyor chain on a 152.4 mm pitch, supplied with the A2 attachment. The standard section runs D 25 mm, H 65 mm and T 10 mm, with F 76 mm and E 42 mm for the attachment and pin geometry shown below.
The chain is heat-treated so the pin, bush and link carry the load of a cane carrier rather than wearing out of pitch in a season. Attachments are welded to your drawing, so a P152.4 chain can be matched to the flights already on your line.
Cane Carriers and Feed Tables: main conveying of cane at the front end of the mill.
Bagasse Conveying: wet bagasse duty behind the milling train.
Flight and Scraper Lines: where an A2 attachment carries flights.
Intermediate Carriers: between milling stages where a steady pitch matters.
General Bulk Handling: heavy conveying where a 152.4 mm pitch fits the drive.
Every working part - pin, bush and roller - is heat-treated or hardened to reach the strength and working life the sugar duty demands, not left in the as-machined state.
The chain is built for high strength and a long working life under continuous load, which is what keeps a mill's carrier line running between shutdowns.
The roller turns on the bush rather than sliding, so friction and wear are taken at the bush/roller interface and the pin is protected from the abrasive load.
A full line of matching sprockets is available, and attachments are made to your drawing, so chain, sprocket and attachment come from one source and wear together.
Chain, sprockets, slats, buckets and shafts can all be supplied together, so the whole assembly is sized and matched by one manufacturer instead of being pieced together.
The table below gives the standard P152.4 section with the A2 attachment. Dimensions are in mm. Attachment lead, height and hole positions are made to your drawing.
| Chain No. | D | H | T | F | E |
| mm | mm | mm | mm | mm | |
| P152.4 | 25 | 65 | 10 | 76 | 42 |
SHINING has manufactured conveyor chain and sprockets for sugar mills for over twenty years, with drop forging, welding, machining and heat treatment under our own control. Every production batch is tensile-tested before shipment, and our quality system is certified to ISO 9001:2015 (46026Q00958R053) and ISO 14001:2015 (46026E00959R053).
We build to interchange. Send the OEM part number, an old link or a drawing, and we will confirm the match and reproduce it dimension-for-dimension, with sprockets and attachments cut to suit.
Standard production lead time is 60 days from receipt of the order and confirmation of the drawing. For breakdowns and planned shutdowns we can discuss an expedited slot - tell us your date and we will plan the delivery around it.
Our engineers support station and duty review, chain selection, wear and elongation analysis, maintenance planning, and genuine replacement parts. Send your conveying duty and we will size the chain for you.
Tell us your duty, your drawing or the OEM part number, and our engineers will come back with the right chain and a price. Email the sales team at sales@shiningco.com.
