P260 large pitch steel mill chain with two attachments for heavy billet and slab handling.
The P260 is a large pitch steel mill chain used where a heavy billet or slab is placed on the conveyor rather than poured. The page name records the two-attachment build; the dimension tables below reproduce the SHP260 entry of the 1.2.3 steel mill chain catalogue, covering the outline and plate dimensions together with the catalogue tensile strength.
Heavy billet and slab transfer
Large pitch conveyors on hot-side positions
Attachment builds for locating heavy stock
Replacement chains against an existing SHP260 drive
The P260 build is selected where stock size and load placement make a smaller pitch chain unsuitable.
Main dimensions and plate dimensions with tensile strength are copied cell for cell from catalogue 1.2.3 page 15.
The two-attachment build, hole pattern and spacing are made to the customer drawing and quoted per requirement.
Link plates, pins and bushes are specified by grade and heat-treatment method after the working temperature and load are known.
SHP260 main dimensions (catalogue 1.2.3, page 15)
| Chain No. | P | b1 | H | E | F |
|---|---|---|---|---|---|
| mm | mm | mm | mm | mm | |
| SHP260 | 260.0 | 80.0 | 120.0 | 150.0 | 240.0 |
SHP260 plate dimensions and tensile strength (catalogue 1.2.3, page 15)
| Chain No. | t | T | R | Tensile strength |
|---|---|---|---|---|
| mm | mm | mm | kN/lbf | |
| SHP260 | 20.0 | 19.0 | 60.0 | 1200/269760 |
All dimensions and strength values on this page are reproduced cell for cell from the approved SHINING catalogue or the approved on-site table. No value has been converted, interpreted or added. Internal structure dimensions, tolerances and process parameters are not published. Outline and fitting dimensions are confirmed from the customer drawing or an old link before manufacture.
Dimension symbols P E F H R T t b1 are marked on the drawings; all values in mm are given in the specification table.
On heavy billet lines the load is placed in one movement, so we size the chain around the shock and the attachment fixing rather than around a nominal throughput figure. SHINING has manufactured conveyor chain for more than twenty years in a 36,000 m2 production base in Changzhou, Jiangsu, with in-house cutting, machining, welding, heat treatment and testing. Chains are produced under ISO 9001:2015 and ISO 14001:2015 certified systems, with material certificates and certificates of conformance issued with every order. Standard production lead time is 60 days and MOQ is 100 m.
Send the working position, centre distance, attachment drawing or an old link and our engineers will confirm the chain build, the attachment spacing and the matching sprocket before manufacture. Twin strands are length-matched before dispatch, and inquiries are answered within 24 hours. Write to sales@shiningco.com for a drawing review.
Write to sales@shiningco.com with the working position, centre distance, attachment drawing or an old link. Inquiries are answered within 24 hours.